Orienting The Interactive Whiteboard - Olivetti OLIBOARD Manuel De L'utilisateur

NOTE: After having started the driver, click on the icon of the Oliboard driver
to activate or deactivate the "autostart" parameter, depending on
whether or not you want the Oliboard driver to be run automatically
the next time the computer is powered on. If the computer is
permanently connected to the whiteboard, it is advisable to activate
"autostart". On the other hand, if the computer could be
disconnected from the whiteboard, it is advisable to deactivate
"autostart" to avoid an error message appearing the next time the
computer is powered on which indicates that no whiteboard is
connected.

Orienting the Interactive Whiteboard

This function serves to tune the whiteboard for the image to be projected onto it.
1. Using the mouse left button, click on the Oliboard Driver icon
bar at the bottom. Select "Orientation" in the popup menu, then select the type
of orientation required (see the INSTRUCTION note at the end of this paragraph).
NOTE: The orientation operation can also be activated by means of the special
key at the top of the Function Key panel on the whiteboard.
OLIBOARD - Interactive Whiteboards
in the control
15