Windows Software Installation; Express Installation - Olivetti OLIBOARD Manuel De L'utilisateur

WINDOWS SOFTWARE INSTALLATION

The Oliboard software provides two types of installation: "Express installation" and
"Step-by-step installation".
Express installation includes the following phases that are carried out automatically in
sequence:
-
Installation of Oliboard software driver.
-
Installation of Oliboard application software.
-
Installation of software driver for USB cable.
Step-by-step installation allows the software to be installed one step at a time.
E I
XPRESS NSTALLATION
Do not connect the cable of the whiteboard to the computer (if the USB cable
is already connected to the computer, disconnect it). During the installation
procedure, a message is displayed on the screen indicating when you should
connect the cable.
(If installation is started with the cable already connected, afterwards you will have to
install the software driver for the USB cable).
1. Insert the Oliboard Software disk.
2. Click on the program logo (this is equivalent to running the "autorun" program).
3. The Installation Guide window opens.
4. Click "Install All" to perform the express installation.
5. Choose the language you want to install and confirm with "Next".
6. Select the installation path and confirm with "Next". Software installation starts;
at the end, the driver for the USB cable is installed.
7. When the system asks if you want to install the FTDI USB driver, click on "YES" to
perform the installation. At the end (after a few seconds), a message is displayed
asking you to connect the USB cable to the computer.
Connect the cable to a USB port on the computer (the other end of the cable
must be connected to the Interactive Whiteboard).
After connecting the cable, click "OK".
OLIBOARD - Interactive Whiteboards 11