About Cds; Handling Cds - Kenwood KDC-MP2028 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

About CDs

Handling CDs

• Don't touch the recording surface of the CD.
• CD-R and CD-RW are easier to damage than a
normal music CD. Use a CD-R or a CD-RW after
reading the caution items on the package etc.
• Don't stick tape etc. on the CD.
Also, don't use a CD with tape stuck on it.
When using a new CD
If the CD center hole or outside rim has burrs, use it
after removing them with a ball pen etc.
Burrs
CD accessories
Don't use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
6
|
English
Removing CDs
When removing CDs from this unit pull them out
horizontally.
CDs that can't be used
• CDs that aren't round can't be used.
• CDs with coloring on the recording surface or that
are dirty can't be used.
• This unit can only play the CDs with
It may not correctly play discs which do not have
the mark.
• A CD-R or CD-RW that hasn't been finalized can't
be played. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-
Burrs
R/CD-RW recorder instruction manual.)
CD storage
• Don't place them in direct sunlight (On the seat
or dashboard etc.) and where the temperature is
high.
• Store CDs in their cases.
.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Kdc-mp228Kdc-228

Table des Matières