Eschenbach 16033 Mode D'emploi page 7

• Do not use the lamp near flammable objects or
materials.
• Do not damage the power cord, place it near any
hot objects, bend it excessively, twist it, pull it, place
heavy objects on top of it or wrap it into a bundle.
• Do not overload the power outlet and extension cord.
The operating components
q Lampshade
w Light tube
e Adjusting screw
r Coupler
t Lamp housing plug
Lamp assembly
1. Remove all device components from the packaging. Place the pedestal
on the floor. Push the aluminium tube onto the pedestal's peg.
2. With one of the supplied screws secure the aluminium
tube to the pedestal as shown above.
3. Subsequently plug the cable plug from the aluminium
tube into the socket at the base of the lamp housing.
4. Put the base of the lamp housing onto the aluminium
tube and screw both components securely together.
(see diagram on page 2)
y Switch
u Plug connection
i Aluminium tube
o Pedestal
a Mains power cable
- 7 -