Publicité
Les langues disponibles
Les langues disponibles
TSE 4001 PINCODE
The electronic cylinder operates using a 6-digit pincode. In option to that,
you can also use the TSE 5103 E-KEY.
Electronic cylinder TSE 4001
The TSE 4001 electronic cylinder includes
the following standard functions:
– Number of pincodes: 1
– Number of E-KEYs: 5
Optional locking media
– TSE 5103 E-KEY remote key
Administrator code
– Factory setting: 123456 (you absolutely need to change this)
In the following description, the administrator code is referred to as
"pincode".
TSE HOME 4001
Technical data
Blocking times
After 3 x wrong pincode entry
1 minute, then 3 minutes each time
Power supply for
2 x MIGNON LR6 AA ALKALINE
keypad
Power supply for
2 x MICRO LR03 AAA ALKALINE
cylinder
Permissible
-15 °C / +50 °C / u
ambient
p to 95 % relative air humidity
conditions*
(noncondensing)
1. Commissioning
When the TSE 4001 pincode is first put into operation, it is necessary to
perform a certain procedure, as the system is delivered from the factory in
a special power saving mode.
– Press "On", the green "ready for opening"-icon flashes briefly
– Press "Enter" for approx. 5 seconds until the blocking time icon starts
flashing, while the green "ready for opening"-icon is on permanently
– The blocking time icon turns off after approx. 20 seconds. Now enter
the factory-set pincode (1-2-3-4-5-6).
When the procedure has been successfully finished, the "ready for
opening"-icon turns on, while in case of an incorrect procedure,
the "entry denied" icon flashes. In case, please repeat the procedure.
English | 8
Publicité
