Princess Smart Air Conditioner 9000 Mode D'emploi page 12

Instruction manual
The unit doesn't cool •
enough.
•
•
•
•
Noisy. •
•
E0 Code •
12
The doors or • Make sure all the
windows are not windows and
closed. doors are closed.
There are heat • Remove the heat
sources inside the sources if
room. possible.
Hot air exhaust • Connect or clean
hose is not the hot air
connected or exhaust hose.
blocked. • Reset the
Temperature temperature.
setting is too high. • Clean the air inlet.
Air inlet in
blocked.
The ground is not • Place unit on a
level or not flat flat, level ground if
enough. possible.
The sound comes
from the flowing
of the refrigerant
inside the air
conditioner.
Room • Replace room
temperature temperature
sensor failed. sensor.
E1 Code • Condenser
temperature
sensor failed
E2 Code • Water tray full
when cooling
E3 Code • Pipe temperature
sensor failed.
E4 Code • Water tank full
THE PRODUCT OR EQUIPMENT CONTAINS
FLUORINATED GREENHOUSE GAS.
Art.nr.
Coolant:
Quantity in kg:
Global Warming Potential:
CO2 Equivalent in tonnes:
Art.nr.
Coolant:
• Replace
condenser
temperature
sensor.
• Take off rubber
stopper and
empty the water.
• Replace pipe
temperature
sensor.
• Please empty the
water tank.
352900
R290
0.212
3
0.000636
353200
R290