Hitachi Koki WR 14DM Mode D'emploi page 8

English
You could get hurt or the movement of the socket
could shake the impact wrench so much as to
make you drop it.
10. Always charge the battery at a temperature of 0
– 40°C.
A temperature of less than 0°C will result in over
charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that
of 20 – 25°C.
11. Do not use the charger continuously.
When one charging is completed, leave the charger
for about 15 minutes before the next charging of
battery.
12. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
13. Never disassemble the rechargeable battery and
charger.
14. Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great
electric current and overheat. It results in burn or
damage to the battery.
15. Do not dispose of the battery in fire.
If the battery burnt, it may explode.
SPECIFICATIONS
POWER TOOL
Model
No-load speed
Angle driver
Capacity
Tightening torque
Rechargeable battery
Weight
CHARGER
Model
Charging time
Charging voltage
Weight
7
16. Do not insert object into the air ventilation slots
17. Bring the battery to the shop from which it was
18. Using an exhausted battery wil damage the
MODEL
WR14DM: with charger and case
0 – 2300 min
M10 – M16 (Ordinary bolt)
M8 – M14 (High tension bolt)
Maximum 200 N·m {2040 kgf·cm}
Tightening is M16 (F10T), when fully charged at 20°C temp.
Tightening time: 3 sec.
EB14B Ni-Cd battery, 14.4 V
(2.0 Ah, 12 cells)
EB1430H Ni-MH battery, 14.4 V
(3.0 Ah, 12 cells)
EB14B: Approx. 50 min. (at 20°C)
EB1430H: Approx. 70 min. (at 20°C)
of the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
purchased as soon as the post-harging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
charger.
WR14DM
–1 (/min)
12.7 mm
1.9 kg
UC14YFA
7.2 – 14.4 V
0.6 kg