Publicité
Les langues disponibles
Les langues disponibles
GB – WALL-MOUNTED INDOOR SPEAKERS
The WMS series is designed for indoor installation and most public-address systems. It provides
quality performance and offers two models: passive speaker cabinets with transformer and active
speaker cabinets. Moreover, the rotatable metal mounting bracket allows easy installation of the
speaker on the wall. This new compact speaker series meets any demands of restaurants,
supermarkets, shopping malls, pubs etc.
Please read the manual thoroughly prior to operating your
CONTROL ELEMENTS
REAR PANEL OF PASSIVE SPEAKER
(1) Input connection
Push-button for fixed installation. The positive connection is usually marked with (+) or red
push-button. Connect it to the amplifier output (+).
The negative connection is usually marked with (-) black push-button. Connect it to the (-)
terminal of the amplifier.
(2) Power selector switch
With this rotary switch you can select the power tappings for two different constant voltages
of 70V or 100V. In the OFF position, the speaker is disconnected from the Line.
(3) Balanced input
Signal input for 6.3mm Jack lead.
(4) ON/OFF switch
Switch the unit on and off.
(5) Stereo input
Input connector of the stereo signal.
(6) Link
This is used for an external signal output and can be connected to another active speaker.
(7) Volume control
Adjustment of the main volume.
Connection of the passive model to an amplifier
If the nominal impedance of the speaker you need to set up is 8 Ohms, then you should select and
connect it to the amplifier terminal with 8 Ohms nominal impedance. Please note that the speaker
nominal impedance is no less than ¾ of the nominal impedance of amplifier output. Connect "8Ω/+"
of amplifier output to the red push button (+) of speaker and "com/-" of the amplifier to the black
one (-) of the speaker.
speaker!
REAR PANEL OF ACTIVE SPEAKER
Publicité
