Configuration Via Sd Card; Retrieve Gateway Configurations - Leviton Luma-Net LumaCAN NP00G Manuel De L'utilisateur

Masquer les pouces Voir aussi pour Luma-Net LumaCAN NP00G:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Http://192.168.90.83/ Internet Explorer
Http://192.168.90.83/
F i l e
E d i t
V i e w
F a v o r i t e s
To o l s
F a v o r i t e s
Http://192.168.90.83/
L U M A - N E T / L U M A C A N G AT E W A Y C O N F I G U R AT I O N S :
Status: Load Complete
Gateway Name (max 12 Characters):
LumaCAN Message Delay(ms):
Date/Time (02:24:52 16/09/2020):

3.3 CONFIGURATION VIA SD CARD

1. Remove SD card by pushing the card in to eject the card.
2. Using an SD card reader open the configuration file and edit (\user\config.cfg).
3. Once configuration is complete save the file and reinstall the SD card.

4. RETRIEVE GATEWAY CONFIGURATIONS

NOTE: Configurations can be retrieved two ways, via FTP or from the SD card.
Via FTP
1. Open a command prompt window.
2. Change to the directory that you want the configuration to be copied to.
3. Connect to the Gateway using the FTP command; ftp xxx.xxx.xxx.xxx, using the IP from the Gateway
display, see Figure 5.
4. If connected successfully the screen will display Service ready for new user.
5. Enter user name: admin
6. Enter password: password
7. Enter the DIR command.
A. All user files are found in /user directory.
B. The "config.cfg" file should be located in the directory.
C. Enter the GET command, Get config.cfg.
D. If the get command was successful the display will read "Command Okay".
8. The computer will execute the command and tell you the data was transferred.
9. To confirm file was transferred, using windows file manager go to the directory you copied the file to and
confirm it is there.
H e l p
NP0GW-10DFF3
Luma-net Address:
100
LumaCAN Address:
100
Ethernet MAC Address:
00:60:35:10:DF:F3
DHCP:
Enabled
Disabled
IP Address:
16
10
Subnet Mask:
255
0
Default Gateway:
0
0
Map Luma-net channel:
1
LumaNet Default Priority:
8
110
LumaCAN Channel Messages:
Normal
Split Out
Packet Logging:
Enabled
Disabled
Log File Filter Tokens:
Enabled
Disabled
10/01/2114 07:20:00
Submit
Reset
© 2006-2010 Leviton Manufacturing Co. Inc All rights reserved.
FIGURE 4
243
223
0
0
0
0
1
to LumaCAN Channel
# of Channels
Page 7
X
2048
X

Publicité

Table des Matières
loading

Produits Connexes pour Leviton Luma-Net LumaCAN NP00G

Table des Matières