On/Off Switch On/Off; Speed Speed; Timer Timer; Mode Wind Change Functions - AEG VL 5569 LB Mode D'emploi

Masquer les pouces Voir aussi pour VL 5569 LB:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
ON/OFF
Switch on/off
Use the ON/OFF button to switch the appliance on or off.
NOTE:
• When switching on for the first time after you have
connected the mains plug to the mains outlet, the
fan works in NOR (normal) mode with a low speed
(LO).
• After switching off and on again using the ON/OFF
button, the appliance continues working in the last
set mode.
SPEED
Speed
Press the SPEED button to select one of the three differ-
ent speeds.
• LO
low
• MI
medium
• HI
high
TIMER
Timer
If you want the timer to switch the device off, press the
TIMER button.
NOTE:
Every press of the TIMER button increases the operating
time by 30 minutes.
Maximum shut-off time: 7.5 hours.
MODE
Wind Change Functions
The device has the two special functions: NAT (NATURE)
and SLE (SLEEP). The speed of the fan buries between the
functions.
Press the MODE button to switch these functions on.
• NAT
Natural Mode
- If the HI (high speed) setting is selected, the speed
alternates between high– medium – low – off.
- If you have selected MI (medium speed), the speed
alternates between medium – low – off.
- In the LO (low speed) setting, the speed alternates
between low - off.
• SLE
Sleep Mode
- If HI speed is set: The fan works in the first
30 minutes as in "Natural Mode" at the HI speed
setting. In the subsequent 30 minutes the fan
works as in "Natural Mode" at the set MI speed. For
the remaining time the fan works as in "Natural
Mode" at the speed setting LO.
- If MI speed is set: The fan works for the first
30 minutes as in "Natural Mode" at the speed set-
ting MI. For the remaining time the fan works as in
"Natural Mode" at the speed setting LO.
- If LO speed is set: Switching between low speed
and shut-off of the fan as in "Natural Mode".
• Select the NOR (NORMAL) function to return to nor-
mal operation.
OSC
Oscillation
• If you select the OSC function the device oscillates
automatically through a range of approximately
60 degrees.
• In order to switch the function of, press the OSC
button again.
MOIST
Mist
The humidifier can be switched on and off regardless of
the fan mode.
Press the MOIST button to select the intensity of the mist:
• LO
low
• MI
medium
• HI
high
• To deactivate the function, press the MOIST button
again.

Refill water

When you want to refill the tank:
• Switch off the appliance.
• Disconnect the plug from the mains.
• If necessary, pour the remaining water out of the tank.
• Proceed as described under "Fill with water".

Shutting off

If you want to shut off the fan:
• Switch off the appliance.
• Disconnect the plug from the mains.
• Empty the water tank and the base of the humidifier
if you do not plan to use the appliance for a lengthy
period.

Cleaning

WARNING:
• Always remove the mains plug before cleaning the
device.
• If you need to remove the protection grid: Always
switch the device of and remove the mains plug.
• Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise this
might result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.

Housing

• Clean the outside of the device with a dry cloth with-
out any additives.
• If the device is very dirty wet a cloth with water and
then wipe the device dry once you have inished.
ENGLISH
51

Publicité

Table des Matières
loading

Table des Matières