Notes On Environmental Protection / Disposal; Storage - EINHELL GE-LC 36/35 Li Traduction Du Mode D'emploi D'origine

Danger! Do not actually touch the surface with
the tip of the bar when performing this test. Keep
a safe distance (approx. 7.8 in.).
Sharpening the chain
Working eff ectively with the chainsaw is only
possible if the chain is in good condition and
sharp. This also reduces the risk of kickback.
The chain can be re-sharpened by any dealer.
Do not attempt to sharpen the chain yourself
unless you have the necessary special tools and
experience.
8.3 Ordering replacement parts:
Service
1. If your power tool requires service,
contact an authorized Einhell USA dealer
or call the Einhell USA customer service
center at 1-866-EINHELL
(1-866-346-4355). Only identical
replacement parts should be utilized for
repairs. This will ensure that the safety of the
power tool is maintained.
2. If the battery charger cable is damaged, it
must be immediately replaced to avoid a
hazard. Contact the Einhell USA
service center at 1-866-EINHELL
(1-866-346-4355) for assistance.
9. Notes on environmental
protection / disposal
The equipment must be properly disposed of
when it reaches the end of its service life. The
equipment must not be disposed of as domestic
waste. Instead, in the interests of the environment
it should be disposed of via a designated
recycling or disposal point for electrical
equipment. Please contact your local authorities
for information about proper disposal of the
equipment in your area. Packaging materials and
worn accessory parts should also be disposed of
at the designated recycling or disposal points.
Anl_GE_LC_36_35_Li_SPK7_USA.indb 20 Anl_GE_LC_36_35_Li_SPK7_USA.indb 20
EN

10. Storage

Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
The reprinting or reproduction by any other
means, in whole or in part, of documentation and
papers accompanying the products is strictly
subject to the express consent of iSC GmbH.
Subject to technical changes
customer
®
- 20 -
03.06.2019 15:34:49 03.06.2019 15:34:49