Mercola Standup SS10R Manuel De L'utilisateur page 30

Recommended Care
Clean goggles
Clean exterior of system
Inspect/clean lamps
Replace lamps
Cleaning and Maintenance
Warning. Disconnect tanning system from electrical power before cleaning.
When cleaning the tanning system, use a cotton towel which is much less abrasive than a paper towel. Never
wipe with a dry cloth, as this will generate a slight static, which attracts dust.
Acrylic Removal
Warning. Disconnect system from electrical power before servicing.
Step 1. Remove thumb screw "D" (Figure 1b.)
Step 2. Carefully lift the Standup system off of the door and set horizontal on the floor.
Step 3. Slide the acrylic out of the top end of the system as shown in figure 3.
Preventive Maintenance for Your Tanning System
After Each
Monthly 6 Months
Session
x
www.mercola.com
Every 1000
x
x
hours
x
31