Mercola Standup SS10R Manuel De L'utilisateur page 27

Step 7. Remove the thumb screw "D" from the bottom, insert the plastic washer "E" and screw the
thumbscrew back in through the slot in the Bottom Bracket as shown in figure 1b.
Step 8. Slide Bottom Bracket "B" so it clamps the Standup against the door snugly, and tighten the thumb
screw.
Optional holes are provided for mounting the Standup on a wall instead of a door (Figure 2.) The brackets,
hardware and instructions included are only for mounting the system on a door. Removal of the acrylic and
lamps first is recommended if mounting the system on a wall. It is the customer's responsibility to ensure
that the mounting methods and hardware used will safely support 50 lbs. and that it is firmly secured against
the wall.
28 www.mercola.com