Installer Section; Installation; Unpacking And Preparing The Appliance For Use; Technical Data - Gastrodomus MS1 Mode D'emploi

UK
page 12
1.

INSTALLATION

1.1 Unpacking and preparing the appliance for use

• Unpack the appliance and remove the packing material.
• Place the appliance on a surface which is not slippery.
1.2 Connection to the mains
The connection to the electric supply have to be made by a
magnetothermic omnipolar switch, with distance of 3 mm between
the contacts, or by fuses, or by a differential properly sized according
to the electric norms in force.
This switch have to be dedicated only to this use and installed close to
the appliance.
Please make sure that there is a proper ground connection.
N.B. The connection cable must have the following characteristics. it
must be at least of the H05 RN F type and have a section suitable for
the appliance power.
N.B.: The appliance is equipped with a 220-240 Vac 50 Hz
connection.
2.

TECHNICAL DATA

SPECIFICATIONS
Dimensions mm
(l,p,h)
Power supply
Frequency
Absorbed power
(Watt)
490
170
190

INSTALLER SECTION

SINGLE DOUBLE
170x190x490 300x190x490
220-240 Vac 220-240 Vac
50 Hz
150 150+150
300
190
50 Hz
490