Power; Dab Radio Mode - THOMSON MIC200IDABBT Mode D'emploi

Power

CAUTION
• Risk of product damager! Make sure that the power voltage
corresponds to the voltage printed on the back label.
• Risk of electric shock! When you unplug the AC power cord
always pull the plug from the socket. Never pull the cord
• Before connecting the AC power cord, ensure you have completed
all other connections
Place the unit in the desired position and unravel the mains cable. Insert the cable into the supply
socket and switch on if applicable.
Auto standby
When playing media from a connected device, the Tower automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Battery power
• Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove
the batteries when appliance will not be used for a long period of time, as this will cause leakage to
the batteries and subsequently damage to your set.
• Use batteries of the same type. Never use different types of batteries together.
• Do not throw the battery into the fire, or exposed to sunshine or the like.
• If the liquid contained in the batteries comes in contact with eyes or skin, wash the area immediately
and carefully with clear water and consult a doctor.
Unit power supply (mains 230V/50Hz)
Connect the power cable plug to the (230V) wall outlet.
Warning:
• Before using the unit, check that the local mains supply is compatible with the unit 230V (50Hz).
• Do not plug or unplug the power cable when your hands wet.
• When planning not to use this unit for long periods of time (i.e., Vacation etc.) disconnect the plug
from the wall outlet.
• When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord in order
to avoid shock risks caused by the damaged cable.
OPERATION
Press and hold the POWER/MODE button for 2 seconds to turn ON/OFF the unit.
Adjusting the volume
Rotate the Volume knob clockwise to increase the volume.
Rotate the Volume knob anti-clockwise to decrease the volume.
Check the display, which will confirm the volume setting.
MUTE FUNCTION
Press the MUTE button on remote control, The volume is muted and the "Volume Muted" will appear
on LCD display. Press this button again to cancel the mute function.

DAB Radio mode

Check that your Radio is in DAB mode. If you are not already in DAB mode, press and release the
POWER/MODE button repeatedly until you are in DAB mode (check the display).
The first time you use the radio or if the station list is empty, your radio will automatically begin to scan
for DAB radio stations. A progress bar will show the progress of the scan and the number of stations
found during the scan will also be displayed.
If you were listening to a DAB station when you switched the radio off, then this station will automatically
- EN 5 -