English | 9 - Burg Wächter VIBRANCY 2020 Notice D'installation Et D'utilisation

Pairing sensor with Base
1. Start App.
2. Expand menu "Dashboard"
"Add Accessory"
3. Scan the QR code, printed on this
accessory.
4. The APP will auto recognize this accessory
and add it to your list. Rename it with a
perspicuous name, which says you the
exact location of the sensor in case of
alarm, e.g. "living room door".
5. Test Alarm function e.g. by triggering
an SOS alarm.
VIBRANCY 2020
–>
–>"Scan QR Code"
Battery replacement instructions
1. Insert the fl at blade of a small screwdriver
into the pry-off slot of transmitter, twist
the blade to remove the cover.
2. Replace the 1 x CR2032 (3V) battery
and then close the cover.
Installation & Notice
1. Remove the battery insulative strip.
2. Pairing to main panel by App before
installing.
3. Attach the sensor with the double-side
sticky tape to safes, drawers, doors or
windows.
4. LED lights stays on: Low battery, please
replace the battery immediately. Do not
use accumulators.

English | 9