Burg Wächter VIBRANCY 2020 Notice D'installation Et D'utilisation page 10

Correct location for installation
The radio signal of the sensor is highly
dependent on environmental conditions.
Metal objects, concrete surfaces, walls, and
metal cables all reduce its range, etc. Other
radio devices and environmental conditions
can also interfere with its operation.
IMPORTANT NOTE: The alarm can only
work as well as permitted by its
installation and environment. The alarm
can indicate dangerous situations but
it cannot prevent them.
The device must not be painted, varnished
or altered in any way.
General safety precautions
and safety instructions
Attention
Any changes or modifications to this
appliance which have not been explicity
approved of by the respective regulatory
authority, may lead to a prohibition of
usage of this appliance.
Limitation of liability
This device complies with the technical
standards in force at the time of production.
We constantly strive to ensure that our
products are technologically cutting edge
and that our handbooks are kept up to date.
We therefore reserve the right to undertake
technical changes and modifications or
adjustments to the instructions without
providing advance notice.
The instructions must be carefully followed.
We accept no liability for damage, as a result
of e.g. incorrect use or installation, improper
handling, insufficient or poor maintenance,
disregard of safety guidelines or general
10 | English
conditions of use. When installed and used
correctly and under the conditions specified,
this device performs the functions described
in the handbook. As the alarm is dependent
upon the specific arrangement put in place
by the customer, there is no guarantee that it
will be triggered.
Safety guidelines
Please read the instructions carefully.
No liability can be assumed for any damage
which may result from failure to follow
instructions.
The device must be used only for the
purpose specified in the instructions. The
device should work effectively as an alarm
in an emergency! Please check regularly that
the device is in working order and that the
batteries are charged. This will ensure that
it functions correctly in the event of
a (hopefully unlikely) emergency.
The device may malfunction when exposed
to unexpectedly high electromagnetic
radiation, manipulation or other influences.
The device must not be installed in damp
areas or near electrical devices which emit
radiation.
Battery-operated devices must not be used
in high temperatures, near sources of heat
or exposed to direct sunlight.
Ensure that packaging and contents are kept
well away from children to avoid any risk
of suffocation.
Please keep instructions in a safe place.
IMPORTANT NOTE: The device may
not function correctly if installed in
an inappropriate location.
If you require an EC Declaration on
Conformity for this device for this device,
please send a request to: info@burg.biz
VIBRANCY 2020