Adjusting The Product's Temperature; After Using The Product - Richway & Fuji Bio BIO-BELT 7000 Manuel De L'utilisateur

Adjusting the product's temperature

1. When the power is turned on, press the
temperature.
▪ Range of temperature: 95 ~ 149°F / 35 ~ 65°C
▪ Each time the temperature button is pressed, the temperature setting changes in increments of
9°F / 5°C.
When adjusting the temperature, the indicator light will change color depending on the temperature
2.
selected. Once selected, the BIO-BELT will heat up to the proper temperature. If the button of the
controller is not working properly, please contact our Customer Service Center.
▪ Green: 95° ~ 104°F (35° ~ 40°C)
▪ Yellow: 113° ~ 131°F (45° ~ 55°C)
▪ Red: 140° ~ 149°F (60° ~ 65°C)
3.
Place the BIO-BELT around your legs, arms, shoulders, or waist with the gemstones faced
inward (gemstones are visible through the clear window). Adjust the strap to secure the BIO-
BELT. We recommend placing a towel between the BIO-BELT and your skin to prevent low
temperature burns.
Do not place the controller on the BIO-BELT when in use. Keep the controller away from the
4.
BIO-BELT.
▪ Do not place the BIO-BELT directly on your skin. Doing so may cause burns or injury to
your skin. Place a towel between the BIO-BELT and your skin during use.
Warning

After using the product

- After using the BIO-BELT, turn it off by pressing the Power button.
- When the power is turned off, unplug the BIO-BELT from the outlet.
[Temperature Up / Down] button to set the desired
10