Würth HSG 18 Compact Instructions D'utilisation page 13

• you need to rule out the risk of falling over an edge or
• an edge protection should be mounted
2. The anchor point for the HSG Compact may not be
below the user's stand level.
3. The deflection at the edge must be at least 90°
4. To prevent a pendulum fall, the working area and lateral
movements from the median axis on both sides should
be limited in each case to a max. of 1.50 m. In other
cases, no individual anchor points should be used but
rather a Class C or D anchor device pursuant to EN 795.
6.) Declaration of Conformity
7.) Identification and warranty certificate
8.) Control card:
Entering the annual audit
8.0–8.3): To be completed for audit
8.0): Next inspection;
8.1): Inspector;
8.2): Reason;
8.3): Comment
9.) Individual information
Individual information on the purchased product
9.1–9.4): To be completed by buyer
9.1): Date of purchase;
9.2): First use;
9.3): User;
9.4): Organisation
13