HETAL FB-1-D Instructions De Montage Et D'emploi page 17

GB
View of inside of flap
Concealed hinges with an opening angle of min. 120° (according to manufacturer's
specifications). For concealed hinges with a smaller opening angle, the opening process
is limited by the concealed hinges only. From 120°, the FB-1-D fitting takes over the stop
For a cabinet width of 900 mm or more, 3 concealed hinges has to be used.
Drilling pattern according to manufacturer's specifications.
Overlay + min. 35
Overlay + 14
The drilling pattern has to
be complied exactly!
Drill holes for 2-part wooden flap
function.
only
2 connecting hinges
has to be used
for round head wooden
screws ø 4 mm
centre punching necessary
17
Key:
= Cabinet carcass
*Centre gap can be between 2 and 5 mm wide
min. 35 + Overlay
14 + Overlay