Publicité
Les langues disponibles
Les langues disponibles
GB
Dear Customer,
In order to guarantee smooth and safe operation at all times, please observe the following safety
instructions:
1. In order for the fitting to work perfectly, the installation instructions must be followed exactly.
2. Because the inner elements of the FB-1-D are spring-loaded with very high tension, the metal hou-
sing must on no account be opened, otherwise injuries may occur.
Should you have any questions, please do not hesitate to contact us.
Yours, Hetal Werke
Application range
Flap weights
From pine (0.45 kg/dm
3
), 16 mm thick, without handle, to MDF material (0.85 kg/dm
with bar handle.
Flap range
Width: from 400 mm to 1200 mm, height: from 2 x 250 mm to 2 x 400 mm.
Fitting used one-sided
For a cabinet width up to 600 mm the fitting can be used one-sided.
Thereby the possible flap weights amount the half of the indications in the table „Fitting used in
pairs".
Fitting used in pairs:
For a cabinet width of more than 600 mm the fitting has to be used in pairs.
Cabinet height
Version
in mm
of link
500 – 530
Type 1
530 – 570
Type 2
570 – 610
Type 3
610 – 650
Type 4
650 – 700
Type 5
700 – 750
Type 6
750 – 800
Type 7
* These indications correspond to the maximum flap weight of a cabinet width of 1200 mm , MDF material (0,85kg/dm
mm thickness, with bar handle.
Other weights are possible. For further information please contact us.
Safety instruction / Application
range of folding flap fitting FB-1-D
Spring tension 200 N
Spring tension 400 N Spring tension 600 N
1,9 to 7,9
5,2 to 14,0
1,9 to 7,3
4,7 to 13,9
1,9 to 6,7
4,1 to 12,9
1,9 to 6,2
3,6 to 11,9
2,0 to 5,8
3,2 to 11,2
2,2 to 5,1
3,0 to 10,4
2,3 to 4,7
2,8 to 9,3
15
Flap weight in kg
11,6 to 14,0*
8,4 to 15,0*
7,8 to 16,0*
6,9 to 17,0*
6,2 to 16,7
5,4 to 15,7
4,2 to 14,0
3
), 22 mm thick,
Spring tension 800
–
11,4 to 15,0*
9,6 to 16,0*
9,0 to 17,0*
8,2 to 18,0*
7,0 to 19,0*
5,8 to 20,0
3
), 22
Publicité
