HETAL FB-1-D Instructions De Montage Et D'emploi page 22

GB
Screw the right and left hand FB-1-D housings in place, as shown in
the drawing below.
Left hand side panel
(Right hand side panel mirror image)
Caution!
The fitting is spring-loaded.
!
For this reason, the link of the FB-1-D has always to be in the open position
(as on delivery). If not, there is a risk of injury!
!
In case of flap weight of more than
14 kg we recommend to fix the fit-
ting with additional screws on the
side wall.
Mounting right and left hand FB-1-D
housing
22
*) Euro screw for 5 mm hole
countersunk head, diam. 7.8 mm, length
min. 13 mm
*)