Publicité
EN
Problem
The appliance
produces no steam.
Water leaks out
from the steamer
base.
Steam lock cannot
be activated.
26
Possible cause
The steamer has not
heated up sufficiently
(power button flashes).
Auto shut-off has
been activated when
the appliance has
not been used for
more than 10 minutes
(power button flashes).
Steam trigger has not
been pressed to emit
steam.
Low water level in the
tank or the tank is not
inserted properly.
Steam lock has been
activated for 10
minutes.
The water tank is not
inserted properly.
Water tank has been
overfilled.
Fail to enter steam lock
function.
Solution
Let the appliance heat
up for 90 seconds.
When the appliance is
ready for use, the light
turns steady.
Press the power button
and wait for 90 seconds
for the appliance to
heat up again.
Press the steam trigger
to activate steam.
Refill the water tank and
insert it properly.
Steam lock feature
comes with automatic
release function. Double
tap on the steam trigger
again for continuous
steam ( refer to
).
Insert the tank properly.
Fill water up to its MAX
marking.
Double tap to activate
the steam lock function
( refer to
).
Publicité
