Care And Maintenance; Greasing The Bearings; Repair; Warranty - Jung JLB 3 K Mode D'emploi

5. Care and maintenance

NOTE
According to DGUV regulation 68, you, as the owner of
this trolley, are responsible for the annual maintenance
and inspection.
WARNING
There is a risk of crushing when servicing a trolley.
Always wear protective clothing, otherwise injuries may
occur.

6. Warranty

You will receive a five-year warranty for the trolleys, under the observance of the respective conditions. Any interfe-
rence with the device within the warranty period will void the warranty, except in case of written consent from the
manufacturer.
© JUNG Hebe- und Transporttechnik GmbH
Transport trolleys series K / S / G / H

5.1 Greasing the bearings

NOTE
Regularly grease the bearings since they are subjected
to strong friction forces. For lubrication,use commer-
cially available high-performance grease for bearings.
> Use a brush to grease all bearings.
> Grease the bearings of the trolley at least once a
year.

5.2 Repair

Necessary repairs are carried out by JUNG according
to a cost estimate, at short notice and at a reasonable
price. Contact details can be found on the back of the
operating instructions.
- 49 -