VONROC CR501AC Traduction De La Notice Originale page 7

2. MACHINE INFORMATION
Intended use
This appliance is designed for blowing air for clean-
ing jobs, inflating car tires, bicycle tires, inflatable
mattresses, sport balls and etc. in conjunction with
the supplied adapter. The appliance is not designed
for continuous operation.
TECHNICAL SPECIFICATIONS
Model No.
Voltage
Frequency
Motor power
Operating mode
Idling speed
IP Class
Air intake
Max. outlet pressure
Weight
Sound power level
* S3 = intermittent operation without the impact of the
start-up. This means that during a period of 10 min-
utes, the maximum operating time is 15% (1.5 min).
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Quick coupler air outlet
2. Accessory compartment
3. Carrying handle
4. Switch
5. Electricity cable
6. Quick coupler
7. Connector
8. Air gun
9. Manometer
10. Release valve
11. Trigger
12. Extension nozzle
13. Hose with air coupler
14. Air hose
15. Ball needle
16. Universal adapter small
17. Valve adapter
WWW.VONROC.COM
18. Universal adapter
19. Nozzle adapter for the nozzle set
20. Nozzle set
3. OPERATION
CR501AC
220-240 V~
Connecting the device to an outlet (Fig. A)
1. Open the cover and take out the air hose (14)
50 Hz
1100 W
S3 15% -10 min*
2. Make sure the ON/OFF switch (4) is in the posi-
3750/min
3. Connect the electricity cable (5) to an outlet.
IP 20
180 l/min
8.0 Bar
4.9 kg
97 dB (A)
On/Off switch (Fig. A)
• Move the ON/OFF switch (4) into the position 'I'
• Move the ON/OFF switch (4) into the position 'O'
Connecting the air gun (Fig. B1)
• Insert the connector (7) of the air gun (8) into
For household use only.
The appliance vibrates during operation.
During operation, always put it down
backwards on its rubber feet.
and required accessories from the storage
compartment (2).
tion 'O' (switch off).
Before using the machine, make sure that
the mains voltage complies with the specifi-
cations on the rating plate. Long supply
cables, extensions, cable reels etc. cause a
drop in voltage and can impede motor start
up.
The appliance vibrates during operation.
During operation, always put it down
backwards on its rubber feet.
to switch the appliance on.
to switch the appliance off.
The appliance is not designed for continu-
ous operation. To prevent the motor from
overheating, the appliance may only be used
as follows: Within a period of 10 minutes,
the appliance may only be operated for 15%
of the period so 1,5 minute. During the rest
of the period (8.5 minutes) the appliance
needs to cool down again.
the quick coupler (6) on the air hose. When
pushing, the connector clicks into place to
secure the air gun.
EN
7