Télécharger Imprimer la page

Cavist 8 Manuel D'utilisation page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
MAINTENANCE
● Shut off power supply before cleaning cabinet.
● Take out wines and shelves, and then clean the
cabinet with soda water first and with clean water.
● Do not use soap or detergent for the cabinet.
● Clean the cellar regularly.
TROUBLESHOOTING
Symptoms
No cooling
Not cold enough
temperature inside
Peculiar smell inside
wine cooler
Inside light flash
Frost on the cold
sink。
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and
electronic products contain hazardous substances that have harmful effects on the environment
or human health and should be recycled. The symbol here indicates that electrical and electronic
equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Possible cause
o Plug not put in
o Low voltage
o Fuse broken
o The wine cooler is placed too
near heat source;
o Bad ventilation;
o Fans don't work;
o The door is not closed tightly
or opened too frequently or
for too long time;
Check whether there is any sour
inside
o Set temperature higher than
inner temperature;
o The automatic defrost function
start to work
Too much humidity or too low
temperature inside the case
Solutions
o Put in the plug
o Ensure normal voltage
o Change fuse
o Keep the wine cooler away from
sunshine or other heat source;
o Place the wine cooler in the area with
good ventilation and keep things away
from the fans;
o Check whether the plug is connected or
change the fan;
o Close the door tightly and don't open
the door too frequently or for too long
time.
Wrap the source or take it out
o Adjust the adjustor
o Normal function. No repair needed
Output the plug, stop the power, and
defrost by hand, Connect power again when
the ice thaws

Publicité

loading