Publicité
Les langues disponibles
Les langues disponibles
User Manual
Installation
1. Ensure all devices are powered off before connection. Once the power supply is connected the
Power LED will illuminate.
2. Connect the Audio Extractor to your source device via HDMI cable. For video and audio pass-
through connect the display to the HDMI Out port via HDMI cable. For digital audio through an
amplifier, soundbar or Hi-fi system, connect the audio device to the Optical port via Toslink (optical)
cable. For analogue audio through active speakers or an analogue amplifier, connect the audio
device to the L/R port via a 3.5mm audio cable.
3. Move the EDID switch to the output required. Please see below for all audio possibilities from each
EDID.
Please ensure the correct output port is used for the input audio format as this may stop any audio from
being output. For example, if the input audio is anything other than analogue stereo, there will be no
audio when connecting to the L/R 3.5mm port.
EDID Table
EDID
TV
7.1CH
5.1CH
Audio Output
Stereo 2CH, 24-bit, 48kHz
8CH Audio, 24-bit, 192kHz
6CH Audio, 24-bit, 192kHz
Audio Formats
DTS Audio 2CH, Dolby Digital
2CH
Dolby Digital 2/5.1CH, DTS
Audio 2/5.1CH, Dolby
DigitalPlus, DTS-HD Master
Audio, Dolby TrueHD, Dolby
Atmos, DTS:X
Dolby Digital 2/5.1CH, DTS
Audio 2/5.1CH
English
Publicité
