Amplicomms RingFlash 100 Mode D'emploi page 33

Set the ring tone
Your RingFlash unit has 3 ring tones
to choose from. Just move the slider
switch on the left hand side of your
product to select ring tone 1, 2 or 3.
Set the Doorbell tone
(RingFlash 200 only)
You can choose from two different
Doorbell tones, just move the slider on
the left hand side of your product to
select Doorbell tone 1 or 2.
Set the alarm mode
There are 4 alarm modes to choose
from. Please use the slider on the right
hand side of the product to select one
of the following alarm modes.
Using your RingFlash 100/200
Mode Ring alarm
0 Off
Strobe light
and speaker
Speaker
and external
shaker
Strobe light
and external
shaker
Stop the ring alarm
Press the STOP button on the front
of the unit to stop the ring alarm for
that call, even if the telephone line
continues to ring. The ring alarm will
return to its original setting for the next
call.
Bell alarm
Bell sound from
the speaker
Bell sound from
speaker and
strobe light
Bell sound from
speaker and
external shaker
Bell sound
from speaker,
strobe light and
external shaker
33