JVC KD-APD49 Manuel D'instructions page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Indication, [Range]
LOUD *
4
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
SUBWOOFER *
1
, [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL ADJ (volume adjust), [–05 to +05, initial: 00]
Adjust the volume level of each source (except FM), in
relation to the FM volume level. The volume level will
automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you
want to adjust.
VOLUME, [00 to 50 or 00 to 30 ]*
Adjust the volume.
*
1
Displayed only when "L/O MODE" is set to "SUB.W"
(see page 15).
*
2
If you are using a two-speaker system, set the fader
level to "00."
*
3
This adjustment will not affect the subwoofer output.
*
4
The adjustment made (LOUD ON/LOUD OFF) will be
applied to all sound modes.
*
5
Depending on the amplifier gain control setting. (See
page 15 for details.)
Storing your own sound mode
You can adjust the sound modes and store your own
adjustments in memory.
1
Select a sound mode.
2
Enter the adjustment mode.
• If no operation is done within
5 seconds, this mode is canceled.
5
3
Select a sound characteristic.
4
Adjust the sound elements of the selected
sound characteristic.
1
Adjust the frequency.
2
Adjust the level.
3
Adjust the quality slope (Q).
Range/selectable items
Sound
elements
BASS
Frequency
60 Hz
80 Hz
100 Hz
120 Hz
Level
–06 to
+06
Q (Q-slope)
Q0.5
Q1.0
Q1.5
Q2.0
BASS: Bass MID: Mid-range TRE: Treble
5
The adjustment made will be stored
automatically. Repeat steps 3 and 4 to adjust
other sound characteristics.
MID
TRE
500 Hz
7.5 kHz
1.0 kHz
10.0 kHz
1.5 kHz
12.5 kHz
2.5 kHz
15.0 kHz
–06 to
–06 to
+06
+06
Q0.75
Q0.75
Q1.0
Q1.25
Q1.25
Q1.5
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-pdr40

Table des Matières