Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Read the Assembly Instructions carefully before use!
•
Make sure that the rubber feet are fitted correctly on the legs and that all nuts and screws are
properly tightened.
•
Do not step on the crossbar, use the equipment as a ladder, or stand on top of the work surface.
•
Never exceed the maximum load for the work surface (100 kg). Always place heavy items carefully
on the work surface to ensure that the load is distributed slowly.
ENGLISH
SAFETY INSTRUCTIONS
ASSEMBLY
1.
2.
3.
4.
5.
9
Fit the crossbars (4) and leg frames (5) with
the screws (9), washers (13) and nuts (10).
Fit the sliders (2) and work surfaces (1) with
the wood screws (8).
Fit the leg frames (5) in the sliders (2).
Match the holes in the sliders with the holes
in the leg frames. Insert the screws (3) and
washers (7) from the outside of the base
and insert the washers (7) and nuts (11)
from the inside. Tighten the screw joints with
a screwdriver and spanner.
Fit the plastic feet (6) on the legs (5). The
feet must be fitted with the long side towards
the outer corner, see arrow on inside.
Fasten the blocks (12) in suitable holes on
the work surface.
Publicité
