i-tec C31VGAHDMIADA Mode D'emploi page 6

USB-C to HDMI and VGA Adapter
CONNECTING A HDMI MONITOR
The adapter provides 1x HDMI 4K Ultra HD port for connecting external
screen or projector with HDMI interface. For displaying your images you
can use a modern plazma or LCD monitors and TVs. The graphic chip,
which is the heart of the docking station, supports up to 4K resolution
3840x2160/30Hz. Connect the monitor to the docking station using
a high-quality HDMI cable. During installation of an additional monitor the
screen of the notebook or tablet can flicker which is a standard condition.
CONNECTION A VGA MONITOR
The adapter provides 1x VGA Full HD port for connecting external screen
or projector with VGA interface. For displaying your images you can use a
plazma or LCD monitors and TVs. Connect the monitor to the docking station
using a VGA cable. During installation of an additional monitor the screen of
the notebook or tablet can flicker which is a standard condition.
It is not possible to use both graphic outputs simultaneously, a single monitor
only can be connected to the docking station (HDMI or VGA)
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity
• Use the device on flat surfaces – you will prevent it from slipping and
falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
6 | ENGLISH