Ecler SCLAT100 Notice D'emploi page 12

XFA (19), XFB (20) Crossfader assignment buttons
The MASTER module of the SCLAT100 features a horizontally positioned fader. This device -
called CROSSFADER - lets you make a transition between any channel signals in a very easy way.
The two push-buttons found below the MUTE button let you assign the current channel either
to the A Crossfader channel (XFA) or to the B Crossfader channel (XFB). A visual indication shows if
the current module is assigned to channel A or B of the crossfader. If a module is not assigned to any
crossfader channel, the signal will be sent directly to the main mix bus. if both push-buttons are
depressed, the module will be assigned to XFA
PEAK (14) and SP (15) Indicators
The PEAK indicator lights up when signal clipping is imminent. The signal is not yet clipped
but the real clipping threshold (saturation) is almost reached. The PEAK indication may sporadically
light up to the rhythm of the music (bass frequencies) or during a "shout". It should under any
circumstances keep lit permanently. The peak indicator activates at +10dB above the nominal input
level.
The SP (Signal Present) indicator directly monitors the input signal before the GAIN control. Its
threshold is set at -40dB. This indication is an excellent quick reference for verifying that the signal
source is actually working.
Channel FADER (16)
The SCLAT100 only employs high quality professional 60 mm faders.
12