Paoli Avvitatori BUTTERFLY Manuel D'utilisation Et D'entretien page 12

TECHNICAL DATA
DESCRIPTION
Portable air impact wrench.
INTENDED USE
Assembly power tool for threaded fasteners.
COMPRESSED AIR SUPPLY
Maximum permissible pressure: 7,6 bar
Working pressure: 6,2 bar
SYSTEM COMPONENTS
View figure Fig.1.
GENERAL INSTRUCTIONS
Read the operating instructions of the
pneumatic tool.
L Before use, place a few drops of oil in the
air inlet of the pneumatic tool.
L Fit a standard male fast connection for
compressed air to the threaded hole.
L Clean the air filter from time to time.
HANDLING
L Counter clockwise rotation (loosening):
Push the lever "C"
selecting the direction R (Reverse).
L Clockwise rotation (tightening): Push the
lever "C" (view figure
direction F (Forward).
ENGLISH
12
OPERATING AND MAINTENANCE MANUAL
(view figure Fig.3-A)
Fig.3-B) selecting the
LUBRICANT
Hammer mechanism
(Molykote® BR2 PLUS)
Air motor lubrication: Oil for pneumatic tools
ENVIRONMENTAL CONDITIONS
Temperature: -5 ° C ÷ + 45 ° C
Storage temperature: 0 ÷ + 40 ° C
Air humidity: <80%
Max Altitude: 2000m from sea level
L To prevent rust and reduce wear, clean and
oil the pneumatic tool after use.
L Store the pneumatic tool in a clean and dry
place.
L Supply only with dehumidified compressed
air with no pollutants.
L Power adjustment: Rotate the regulator
level to the desiderate level indicator
figure Fig.5). The power setting indicators
are for reference and don't indicate a
specific power.
lubrication: Grease
(view