Dörr ZB-200 PV Notice D'utilisation page 14

06.4 Adjusting the brightness of the LCD display
To increase the brightness of the live view in the LCD display (11), press the button for brightness (05) repeatedly until the desired
brightness is reached. Possible settings from 0 - 9. The value is displayed at the left bottom of the LCD display (17), e.g.
06.5 Infrared illumination (for use in the dark)
When using in the dark, press the IR button (06) once, to switch on the infrared illumination (02). The symbol
illumination appears in the top left of the LCD display (11) and you will see a black and white live view.
To increase the brightness of the infrared illumination, press the IR button (06) repeatedly until desired brightness is achieved.
Possible settings from IR1 to IR7.
To turn off the infrared illumination, press the IR button (06) repeatedly until the symbol in the display disappears.
06.6 Battery indicator
Press the On/Off button (03) to turn on the night vision binoculars. In the right bottom of LCD display (11) the battery indicator symbol
appears .
06.7 Taking pictures
Switch on the night vision binoculars with the On/Off button (03). The night vision binoculars is automatically in photo mode. The
top left corner of LCD display (11) the number of photos taken will be shown, e.g.: 00020.
Adjust the focus with the focusing wheel (12). When taking pictures in the dark, switch on the infrared illumination (see chapter 06.5).
Press the release button
06.8 Video recording
Switch on the night vision binoculars with the On/Off button (03). The night vision binoculars is automatically in photo mode first.
Adjust the focus with the focusing wheel (12). For recordings in the dark, switch on the infrared illumination (see chapter 06.5).
To start the video recording, press the button
While recording a red dot
video 00:00:00.
To stop the video recording, press the button
06.9 Turning off
After use press the On/Off button (03) for about 2 seconds to switch off the night vision binoculars.
06.10 Viewing your photos/videos
To view your photos and video recordings, remove the micro SD memory card and read it out with a suitable micro SD card reader
(optionally available from DÖRR) and your PC/Notebook.
CAUTION: When removing the micro SD memory card, the night vision binoculars must be switched off (no live view
display)!
14
(07) to take a picture.
(04).
will flash in the top centre of LCD display (11). In the right top of LCD display, you can see the length of
(04) again. The night vision binoculars switches back to photo mode automatically.
.
for lowest infrared
doerr-outdoor.de