yeedi K700 Manuel D'instructions page 26

6. Troubleshooting
No. Malfunction
The robot gets stuck while
3
working and stops�
The robot returns to the
4 Docking Station before it has
finished cleaning�
The robot does not clean the
5
whole area�
26
EN
Possible Causes
The robot is tangled with something on the floor
(electrical wires, curtains, carpet fringing, etc�)�
When the battery gets low, the robot
automatically switches to Return to Charger
Mode and returns to the Docking Station to
recharge itself�
Working time varies according to floor
surface, room complexity and the Cleaning
Mode selected�
The cleaning area is not tidy�
Solutions
The robot will try various ways to free itself� If it is
unsuccessful, manually remove the obstacles and restart�
This is normal� No solution necessary�
This is normal� No solution necessary�
Remove small objects from the floor and tidy up the
cleaning area before the robot starts cleaning�