Basic Operations; Operation With The Buttons On The Tv; Volume Setting; Programme Selection - Saba S 32 TNV 08 Mode D'emploi

Basic Operations

You can operate your TV using both the
remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press - button to decrease volume or
+ button to increase volume, so a volume
level scale (slider) will be displayed on the
screen.

Programme Selection

• Press P/CH + button to select the next
programme or P/CH - button to select the
previous programme.

Viewing Main Menu

• Press the MENU button to enter main menu.
In the Main menu select sub-menu using P/
CH - or P/CH + buttons and enter the sub-
menu using - or
the usage of the menus, refer to the menu
system sections.

AV Mode

• Press the TV/AV button at the control panel
on the TV to switch your TV to AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to
control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
02-ENG-32820W-1050UK-17MB12-PANEU IDTV-(2 HDMI-3D PAN-BASIC PIP-VGA-WO SVHS)-50131284.p65
Volume Setting
Press
Press
A volume level scale (slider) will be displayed
on the screen.
Programme Selection (Previous or
Next Programme)
• Press P/CH - button to select the previous
• Press P/CH + button to select the next

Programme Selection (Direct Access)

•Press numeric buttons on the remote control
+ buttons. To learn
• Press directly the programme number to

nner

• Whenever you change channel, using the P-
• The information banner can also be
see the detailed help information easily.
• The starting time for EPG is the current time.
English - 71 -
71
- button to increase the volume.
+ button to decrease the volume.
programme.
programme.
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between 10 - 999 (for
IDTV) or 10-99 (for analogue), press the
numeric buttons consecutively (e.g. for
programme 27, first press 2 and then 7).
When the pressing time is due for the second
numeric button, only the first digit programme
will be displayed. The limit of the delay time
is 3 seconds.
reselect single digit programmes.
/ P+ button or the numeric buttons, the TV
displays the broadcast picture along with an
information banner at the bottom of the
screen. This will remain on the screen for
approximately three seconds.
displayed at any time while watching TV by
pressing the button on the remote
control:
Press button again to exit help menu.
23.07.2008, 10:38