Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press
or
button to select Child Lock.
Use
/
button to set the Child Lock On or
Off. When On is selected, the TV can only be
controlled by the remote control handset. In
this case the control panel buttons (except for
the STANDBY button) will not work.
Hence, if one of those buttons is pressed,
"Child Lock On" will be displayed on the
screen when the menu screen is not visible.
Language
Press
or
button to select Language. Use
/
button to select the Language.
EXT-2 Out
Use this setting to define Ext-2 signal output.
Press
or
button to select Ext-2 Out. Use
/
button to set Ext-2 Out to TV/DTV, EXT1,
BAV, YPbPr Audio or PC Audio.
Note:
• For copying from a DVD or VCR device, you
should set desired option for EXT-2 output. If
you plug your device to EXT-1, you will copy
the picture that comes from the tuner.
PC Audio In
Select PC Audio In by pressing
Using
/
button, you can change the PC
Audio In to TV/DTV, EXT-1, EXT-2, BAV, YPbPr
Audio or PC Audio.
Blue Background
If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set Blue Background to On.
By pressing
or
Background. Press
Background as On or Off.
02-ENG-32820W-1050UK-17MB12-PANEU IDTV-(2 HDMI-3D PAN-BASIC PIP-VGA-WO SVHS)-50131284.p65
/
button.
button, select Blue
/
button to set Blue
English - 90 -
90
Menu Background
Press
or
button to select Menu
Background. You can set menu background
level by pressing
/
button.
Menu Timeout
To set a specific display timeout for menu
screens, set a value for this option.
Press
or
button to select Menu Timeout.
Use
/
button to change menu timeout to
15 sec, 30 sec or 60 sec.
Teletext Language
Press
or
button to select Teletext
Language. Use
/
Teletext Language to West, East, Turk/Gre,
Cyrillic or Arabic.
Default Zoom
While zoom mode is set as AUTO, the TV will
set the zoom mode in accordance with the
signal of the broadcast. If there is no WSS or
aspect ratio information, the TV will then use
this setting to adopt.
Press
or
button to select Default Zoom.
You can set Default Zoom to Panoramic, 16:9,
4:3 or 14:9 Zoom by pressing
HDMI Full Mode
Press
or
button to select HDMI Full mode.
Use
/
button to set the HDMI Full mode On or Off.
This feature will be visible while in HDMI modes
in 1080i or 720P. Feature will be invisible while
in other resolution and Pip/Pap modes. If an
overflow happens in the picture, you can set
HDMI Full mode as on to watch more properly.
23.07.2008, 10:38
button to change
/
button.
Publicité
Chapitres
Table des Matières
