Sony a 7 II Mode D'emploi page 57

Auto
Manual
Notes
• The SteadyShot function may not work optimally when the power has just been
turned on, right after you point the camera towards a subject, or when the shutter
button has been pressed all the way down without stopping halfway.
• When using a tripod, deactivate the SteadyShot function because there is a potential
for malfunction of the SteadyShot function.
• When the camera cannot obtain focal length information from the lens, the
SteadyShot function does not work correctly. Set [SteadyShot Adjust.] to [Manual]
and set [SteadyS. Focal Len.] to match the lens you are using.
• When the camera cannot obtain focal length information from the lens, or
[SteadyShot Adjust.] is set to [Manual], the current set value of the SteadyShot focal
length will display to the side of
• When using a Sony lens with a teleconverter, etc., set [SteadyShot Adjust.] to
[Manual] and set the focal length.
Shooting a clear image without camera shake
Analyzes the lens information and automatically
compensates for camera shake.
Compensates for camera shake using the focal length set with
[SteadyS. Focal Len.] (8mm – 1000mm).
• Set the focal length of the lens for shooting.
.
GB
GB
57