Functions And Features; Starting Up; Charging The Battery; Switching The Device On - WEBTEC HPM7000 Guide De Référence Rapide

Starting Up

4.2

Functions and Features

The device is equipped with the following functions:
■ Inputs and outputs to connect sensors
■ Measurements, e.g. of pressure, temperature, volume
■ For recording, saving and analyzing measured data
■ Various types of measurement and their representation
■ Module slots to extend system with input modules
■ LAN connection port
■ Fold-out stand
■ VESA standard for wall installation
5. Starting Up
5.1

Charging the Battery

Before you can put the device into operation, you must charge
the battery fully using the power adapter supplied.
IMPORTANT
Only use the power adapter supplied to charge the battery.
INFORMATION
Observe the following information regarding use of the
integrated battery:
5.2

Switching the Device On

10
flows, frequencies, speeds, particles, water in oil, etc.
► Do not store the device with a low charge status in
order to prevent a total discharge.
► If the charge status of the integrated battery drops
below a specific value, the measurement in progress
is stopped. The measured values and user parameters
are automatically saved. The device switches off
automatically.
► Only use the device within the temperature range
permitted, from -20 to +60 °C.
1
Press the On/Off key.
ª The device starts up.