Graef Classic C 6 Notice D'utilisation page 26

Universal Slicer Master Classic C 6 / Classic C 6
Pull the carriage completely
‹
closed.
Loosen the blade by turning the
‹
EN
blade screw counter clockwise
with a coin.
Clean the inside of the blade
‹
with a moist cloth.
Replace the blade in the reverse
‹
sequence.
important!
Periodically grease the marked
►
points.
WARNING
This process must be performed
►
with great CAUTION as this is
an extremely sharp object.
carriage
The carriage can be removed from
the machine for better cleaning.
To do that, pull out the carriage
‹
latch on the right side of the car-
riage.
Pull the carriage towards the
‹
back and remove it.
26
You can now take apart the
‹
GENIO carriage for better clean-
ing.
Remove the slicing support by
‹
placing it vertically and pulling it
out to the top.
You can now also pull off the
‹
flat spring.
Clean all parts with a moist cloth or
under running water.
Grease
important!
here!
Do not clean the slicing support
►
in a dishwasher!
Please put a few drops of non-
resinous oil or Vaseline on the car-
riage guide once a month. Wipe
off excess oil/Vaseline with a soft
cotton rag.