Graef Classic C 6 Notice D'utilisation page 24

Universal Slicer Master Classic C 6 / Classic C 6
30° tilt
The tilt function is especially use-
EN
ful when slicing bread, dry sausage
and vegetables. The tilt function
takes advantage of the natural
gravity of the items to be sliced
while feeding.
To tilt the unit, proceed as below:
Press the lock button. The unit is
‹
unlatched.
Pull the unit up powerfully with
‹
the tilting lever until you hear it
latch.
The unit is only secured if you
‹
hear it latch.
You can now continue as de-
‹
scribed under "Slicing".
After completing the slicing
‹
process, swivel the unit back.
Turn the tilting lever down.
‹
The arresting bolt latches in by
‹
pressing on the rear part of the
profile.
GENIO carriage
The GENIO carriage uses its spring-
loaded carriage support to keep
the items to be sliced in the start
position. It continuously adapts to
24
the size and weight of the items
to be sliced, bringing them from
the hard anodized aluminium slic-
ing support into the ideal position.
That makes additional fixation as
used in conventional carriages un-
necessary while at the same time
absolutely precluding the food
from slipping or rolling off. Re-
gardless of what is to be sliced, the
GENIO carriage completely rede-
fines slicing thanks to its enormous
flexibility, great operating comfort
and ergonomic handling together
with new high standards for safety,
simplicity and speed.
The unique spring mechanism
keeps the GENIO carriage adapted
to the particularities of the items to
be sliced. They cannot roll off and
they can always be ideally and ef-
fortlessly guided to the blade.
If you happen to want to slice heavy
items (such as bread or ham), you
can lock the slicing support.
Press the arresting bolt and then
press down the slicing support. Re-
lease the bolt again.
To unlatch, press the bolt; the slic-
ing support springs up.