Velleman CAMCOLVC7 Notice D'emploi page 5

Masquer les pouces Voir aussi pour CAMCOLVC7:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
7.
Update system time
• Create a text file named time.txt.
• In that text file, enter the date and time in the following format:
(YYYY=year, MM= month, DD= date, hh=hour, mm=minutes, ss= seconds)
e.g.:
2009.11.18 13:43:00
• Plug the CAMCOLVC7 into the USB port of your PC.
• Copy time.txt to the root directory of the CAMCOLVC7.
• Shut the USB device down in a proper way and unplug it from the USB port.
• Switch the CAMCOLVC7 off and on again. At this point, date and time as specified in
the time.txt file are loaded into the system memory and the file itself is removed from
the directory.
8.
LEDs
picture recorder
status LED [F]
power LED [G]
video recorder
status LED [H]
9.
Batteries
This recorder contains an internal rechargeable battery. When the device is end-of-life,
this battery has to be removed.
To do this, remove the 4 screws (red, see figure below) and the cover.
Cut off the battery leads and dispose of the battery in accordance with local
regulations.
WARNING:
Never dispose of batteries in fire, as they could explode.
Keep batteries away from children.
10.
Technical Specifications
pick-up element
video resolution
picture resolution
19/07/2010
CAMCOLVC7
YYYY.MM.DD hh:mm:ss
on, red
picture/sound recorder ready
shortly off
picture taken
blinking
sound is being recorded
off
picture/sound recorder powered off
off
recorder powered off
on, green
recorder powered on
on, blue
video recorder ready
blinking
recording video
off
video recorder off
colour CMOS sensor
720 x 480 pixels
1600 x 1200 pixels
5
Rev.02
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières