Package Contents; Important Information On The Device; Description Of Device And Accessories; Initial Use - Beurer IL 50 Mode D'emploi

and accessories to direct sunlight, extreme hot or
cold temperatures or humidity (e.g. in the bath-
room).
• Dispose of the device, components and optional
accessories according to applicable local regula-
tions. Unlawful disposal may cause environmen-
tal pollution.

2. Package Contents

For details of the delivery scope, see description of the
device and accessories on page 5.
• Infrared heat lamp
• These instructions for use
3. Important information on the
device
Electrical safety
The unit is protected against overheating by an au-
tomatic thermal cut-off Protective insulation.
Proper use
The unit is intended for directing infrared radiation
at the human body.
Any other use is regarded as improper. This unit is
not designed for commercial use, but for use in the
private home!
4. Description of device and
accessories
1 Swivelling body with handles
2 Disc
3 On/Off switch
4 Remaining time display
5 Time selector
6 Foot with integrated cable channel for coiling the
power cable.

5. Initial use

• Place the unit on a solid and even surface. The unit
must not be set up on a slope or laying down.
• The minimum distance
between flammable items
and the infrared lamp must
not be less than 40 inches
(1 m).

6. Operation

Unpacking and setup
• The timer switches off automatically at the end of
the set time.
• The swiveling body allows you to adjust the infra-
red heat lamp to suit your needs.
• Insert the plug into a wall outlet.
• Switch on the unit at the On/Off switch (3). The
remaining time display (4) shows 15 minutes.
• Set the desired treatment time (1 to 15 minutes)
by pressing the time selector (5) several times.
• The set time will appear on the display (4).
Preparing for treatment
• Arrange yourself in front of the unit so you can re-
lax and enjoy the treatment of the part of the body
concerned.
• Tilt the lamp so the unit is angled directly at the
part of the body being treated.
1
• The distance to the infrared heat lamp depends
largely on personal heat sensitivity and the treat-
2
ment concerned.
• Make sure the distance between the infrared heat
lamp and the part of the body being treated is not
less than 30 cm (12 inches) and not more than
40 cm (16 inches)!
3
Do not use the unit for more than 15 minutes at a
time (risk of overheating). Allow the unit to cool down
4
before you use it again.
Treatment duration
5
Important
6
Risk of burns: Remove any metal items, e.g. belt
buckles, necklaces, bras, jewellery or piercings, from
the treatment area before switching on the device as
they can become very hot.
5
min.
40 inches