refill with water and switch on - the kettle will
then boil and cut off as in normal operation.
7. Place the power base on a dry flat surface.
8. Place the kettle on the power base.
The electrical connections will be made
automatically as the kettle slides onto the power
base.
9. Plug the cordset into an earthed power socket.
10. Press the
button, the kettle heats up and
a beep sounds. After the water has boiled the
indicator turns off and the buzzer sounds some
beeps.
11. When the water has boiled, the kettle will switch
off automatically.
12. Do not remove the kettle from the power base
without switching off first.
13. To pour water, lift the kettle from the power base
and pour.
ADVANCED OPERATION:
Keeping temperature mode
1. Press and hold the (ON/OFF) button for 2
seconds, a beep sounds from the buzzer and
the kettle is in "keeping temperature mode".
The red illumination indicates that the kettle is in
"boiling water mode".
It will keep the temperature above 85°C for
2 hours.
2. Press the button (+/-) once, the green
illumination indicates that the kettle is in "60°C
mode". It will keep the temperature at 60°C for
2 hours.
3. Press the button (+/-) twice, the blue illumination
indicates that the kettle is in "70°C mode". It will
keep the temperature at 70°C for 2 hours.
4. Press the button (+/-) 3 times, the yellow
illumination indicates that the kettle is in "80°C
mode". It will keep the temperature at 80°C for
2 hours.
5. Press the button (+/-) 4 times, the purple
illumination indicates that the kettle is in "90°C
mode". It will keep the temperature at 90°C for
2 hours.
Setting temperature only once
1. Press the (ON/OFF) button shortly, a beep
sounds from the buzzer and you can set now the
temperature. The red illumination indicates that
the water will be boiled.
2. Press the button (+/-) once, the green
illumination of 60°C turns on.
The heating element will switch off when the
water temperature reaches 60°C.
3. Press the button (+/-) twice, the blue illumination
of 70°C turns on.
The heating element will switch off when the
water temperature reaches 70°C.
4. Press the button (+/-) 3 times, the yellow
illumination of 80°C turns on.
The heating element will switch off when the
water temperature reaches 80°C.
5. Press the button (+/-) 4 times, the purple
illumination of 90°C turns on.
The heating element will switch off when the
water temperature reaches 90°C.
After use, please remove the plug from the
power outlet.
HOW TO CARE FOR YOUR KETTLE
Wipe the exterior of the kettle with a soft, damp
cloth or sponge. Remove stubborn spots with a
cloth moistened with mild liquid detergent. Do not
use abrasive scouring pads or powders. Never
immerse the kettle in water or other liquids.
From time to time depending on the nature of
your water supply, a lime scale deposit is naturally
formed and can be found mostly adhered to
the heating element and reduces the heating
capacity. The amount of lime scale deposited (and
subsequently the need to clean or descale) largely
depends on the water hardness in your area and
the frequency with which the kettle is used.
Limescale is not harmful to your health. But if
poured into your beverage, it can give a powdery
taste to your drink. Therefore, the kettle should be
descaled periodically as indicated below:
DESCALING
Descale the kettle regularly. With normal use, at
least twice a year.
1. Fill the kettle up to „MAX" with a mixture of
one part ordinary vinegar and two parts water.
Switch on and wait for the appliance to switch
off automatically.
2. Let the mixture remain inside the kettle
overnight.
3. Throw the mixture away next morning.
4. Fill the kettle with clean water up to „MAX" and
boil again.
5. Throw away this boiled water to remove any
remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.
360° CONNECTOR BASE
The 360° connector between the kettle and its base
means that the kettle can be located at any point on
the base. This is ideal for left and right-handed users
as the kettle can be positioned conveniently on your
kitchen counter.
TECHNICAL DATA:
220-240V • 50/60Hz • 1850-2200W
Environment friendly disposal
You can help protect the environment! Please
remember to respect the local regulations: hand
in the non-working electrical equipments to an
appropriate waste disposal center.
3