Insignia NS-R5101 Guide De L'utilisateur page 10

Connecting a CD player
Before connecting a CD player, make sure that
you have the correct type of cable based on the
type of connector available on your CD player as
well as the sound quality you want to hear.
Audio connector type
Digital (Coaxial or Optical)
Analog (RCA type plug)
To connect a CD player:
• Connect the audio cable(s).
• Connect one end of the audio cable(s) to
your receiver.
Best quality CD connection
Default digital input for CD is COAX 2.
See "Modifying digital audio" on
page 18 for information about assigning
CD to a different digital input.
Connecting a second audio component
To connect a tape deck or CD player:
• Connect the audio cable(s).
• Connect one end of the audio cable(s) to
your receiver.
10
Insignia NS-R5101 5.1 Surround Sound A/V Receiver
Quality
Best
Good
www.insignia-products.com
• Connect the other end of the cable(s) to
your CD player.
Caution
Some optical fiber cords may not work with this
receiver. Consult your dealer if the optical cord
does not fit into the receiver.
Notes
• When making a coaxial connection, use a 75 Ω
coaxial cable instead of a conventional audio
cable.
• Use only one digital audio connection for each
device. Do not connect one device using more
than one connection.
Good quality CD connection
• Connect the other end of the cable(s) to
your tape deck or CD player.