Gallagher HR4 Notice D'utilisation page 19

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
Note:
The table will be empty if no devices have previously been
found. Any previously connected devices will be displayed in
parentheses. e.g. '(Gallagher-TSi)'
The Reader is now able to be searched for and found by other
devices (Discoverable). The status of the current connec on is
displayed on the screen.
4. To ini ate a connec on from the HR4 Reader, press the
Search
This will search for new Bluetooth or WiFi devices in range. As
the name of each device is received it will be displayed,
replacing the Bluetooth or WiFi address.
5. Use the arrow keys to select a device to connect to and press
OK
the
The connec on status will change to Trying to connect...
See Info so key (following page) for further advanced details
when connec ng to Bluetooth.
so key.
bu on.
Note: The HR4 can
be confi gured to
send and/or
recieve data from
other devices via
Bluetooth and
WiFi.
17