Wireless - Gallagher HR4 Notice D'utilisation

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual

Wireless

The HR4 Reader is both Bluetooth and WiFi enabled and is able to
be searched for and connected to, by other devices
(Discoverable),
or perform a search to ini ate the connec on itself. Only one
Bluetooth or WiFi device can be connected to the reader, at any
me.
Note: WiFi func onality is only available on HR4 v2 hardware.
Icon Descrip ons
Icon
Wireless Setup
1. From the Main Menu screen, use the arrow keys to select the
Wireless icon
2. The Wireless screen will display, showing the last known
connec on as either Bluetooth (default for fi rst me
connec ons) or WiFi.
To change the type of communica on, select the fi eld where
Bluetooth or WiFi is displayed and press OK. Use the arrow
keys to change the communica on type and press OK.
Note: Selec ng None will turn off Bluetooth and WiFi, and
will save ba ery power if a communica on connec on is not
required.
3. The connec on status and device table will be displayed and
the connec on status will be in 'Discoverable' mode.
16
Descrip on
Flashing Searching for a Bluetooth or WiFi device
Steady Bluetooth or WiFi device connected
Blue
Grey / No Bluetooth or WiFi connec on ac ve,
Red line but Reader is Discoverable, or Reader is
trying to connect to a device.
No icon Bluetooth or WiFi disabled
OK
and press .