Product Overview; Using The Appliance; Adjustments - for_q Q-ARM 4038 BASIC Mode D'emploi

1
2
3
4
5
6
7
8
1
1
2.
1.
10
11
12
13
14
15
2
2

Product overview

9
1 Safety button
2
Lower on/off trigger
3 Upper locking lever
4 Safety flap
5 Lower locking lever
6 Main handle
7 Battery cover
8 Wheel

Using the appliance

Caution! Before start using
the appliance, check the
blades and fastening elements for
damage. Do not use the appli-
ance if it is damaged.
1. The appliance is equipped with a
safety switch. In order to switch
the appliance on, press and hold
the safety button 1, tilt the appli-
ance backwards, pull the on/off
triggers 2 or 10 and release the
safety button 1.
LOWER HANDLE
1
Move the lower handle 12 to an
upright position and close the
lower locking lever 5.
Caution! Never use the appliance with open locking levers.
COLLECTION BAG
1
Connect the two lower units of
the collection bag 13, then at-
tach the collection bag lid.

Adjustments

9 Handle
10 Upper on/off trigger
11 Upper handle
12 Lower handle
13 Collection bag
14 Height adjustment lever
15 Cutting blade
2. Keeping the on/off triggers 2 or
10 pulled, wait until the appliance
has reached full speed.
3. Place both hands on the handle 9,
return the appliance back to the
ground, and slowly start pushing
the appliance forward.
4. Start mowing in parallel lines. For
a better result, repeat the process
in a 90° angle.
5. To switch the appliance off, re-
lease the on/off triggers 2 or 10.
Wait until the blade has come to a
complete stop before proceeding
with further actions.
UPPER HANDLE
2
Install the upper handle 11 to
the lower handle 12 as shown,
using the upper locking lever 3
assembly.
2
Turn the collection bag 13 up-
side down and install the two
collection bag screws.
EN
137