Publicité
Les langues disponibles
Les langues disponibles
DMX address setting:
• Press "MODE" to "A.001". "A" denotes DMX Address
• Press "UP" or "DOWN" to set address with range of "001-512"
2.4.3. Preset Mode
• Press "MODE" to "rEd" or "GrEE" or "Blue" or " AGEN" or "Yell" or "SUN" which separately denote "red", "green", "blue",
"cyan", "magenta", "yellow", "white".
• Press "UP" or "DOWN" to select and operate these modes.
2.4.4. Auto Mode
• Press "MODE" to "SP.01" or "Fd.00" or "FS.00" or "Pr.01" or "So.00".
-
"SP" denotes "Switch color speed" with range of "1-100", "FL" stand for "100"
-
"Fd" denotes "Fade speed" with range of "0-100", "FL" stand for "100"
-
"FS" denotes "Flash speed" with range of "0-100", "FL" stand for "100"
-
"Pr" denotes "Program" with range of "1-20"
-
"So" denotes "Sound" with range of "0-15", "FL" stand for "15". "0" means that sound control is off. From "1" to "15",
the sensitivity of sound control from low to high.
• Press "SET" to round select "SP" and "Fd" and "FS" and "Pr" and "So".
• Press "UP" or "DOWN" to adjust the value.
2.4.5. Manual Mode
• Press "MODE" to "r.000" or"G.000" or "b.000" which separately denote "red", "green" and "blue"
• Press "SET" to round select "r", "G", "b"
• Press "UP" or "DOWN" to adjust the brightness with the range of "0-255"
2.4.6.
Reset
Reset default.
Operating way:
Press "MODE" to "LoAd", then press "SET" the screen will display "C-00", "C-00" denotes identification code
Then press "UP" or "DOWN" to enter the ID code "C-43", press "SET" again.
It is successful when the screen shows "8.8.8.8."
Publicité
