Nicols POWER PACK LED 300 Manuel D'utilisation page 4

1. LED PANELS
1.1. OPERATION
- Connect the connection cable-ends (Power link cable included) of the LED luminaries with the sockets of the
controller.
- Connect the controller to the mains with the power-plug.
- With the POWER-switch, you can switch the device on and off.
-
You can select the programs by pressing the buttons on the controller.
Attention: The controller can be used with up to 4 luminaries.
1.2. TECHNICAL SPECIFICATIONS
Power supply: ................................................................................. 24 V DC
Power consumption: ............................................................................. 23 W
Number of LEDs: ..............................................18 x 1 W (6 red, 6 green, 6 blue)
Dimensions (LxWxH): .............................................................156 x 155 x 56mm
Weight: .............................................................................................1.2 kg
Maximum ambient temperature T : .........................................................45° C
Maximum housing temperature T (steady state): .......................................95° C
Min. distance from flammable surfaces: .................................................. 0.5 m
Min. distance to lighted object: ...............................................................0.1 m
2. CONTROLLER
2.1. TECHNICAL DATA
Power input..............................................................AC 230V~ 50Hz
Power output ............................................................DC24V 4.5A
DMX output .............................................................XLR 3 Pin female
Dimension................................................................222 x 141 x72 mm
Weight................................................................... ..3.2Kg
2.2. OUTPUTS
Four separate RGB outputs via reliable aviation plugs.
Four outputs can be controlled separately
- R: Voltage output 24V, single Max power consumption 20W
- G: Voltage output 24V, single Max power consumption 20W
- B: Voltage output 24V, single Max power consumption 20W
Total power consumption output 100W
POWER PACK LED 300
USER MANUAL
Please carefully the user manual before any operations